So you've decided the kitchen needed a facelift, but do not want to do to get a second mortgage. The introduction of the new kitchen doors can revitalize the entire hill. This is a big project, which is a little information, "such as woodworking, but it's certainly a good way to get exactly what is needed cabinets for you. In order to read a tutorial on how to make the cabinet doors.
The first thing to do, a door cut out of the raw material, and the cabinets are made ofby.
Cut the sides of the door a little "under the name
Replace the wood and cut the top and bottom slightly larger than the frame opening.
The next item to cut the edges of the door.
Measure the height and width of the door frame. Draw this measure on the back of the closet door.
Set your circular saw blade that about one third is from the deep woods.
The edges of the door.
Then you need a routerBevel the edges of the door.
Run the router at the sides, top and bottom of the wing.
Clean the dust and remove the toilet door and check the layout.
Cut surfaces are the outside
If everything is tight before you go and make the side door and start the next door.
Repeat this process for each port.
She is creating a set of double doors, a little "different.
You can use the same procedure forDevelopment of a model, but this time cut 1 piece of wood that fit both doors.
After you have done up to this point in the middle, cut the wood to split and cut to length by two doors.
The reason for the use of a single sheet of wood to preserve the wood grain to match the doors.
Not cut or do not have the internal length of the 2-ports that you want to fit neatly inside the case.
At this point, you will need help to keep the double doorsto verify the adjustment.
Since you do not cross the line center, at the gates, you can cut a wire on the sides.
Now you have all the doors it's time to build everything on the sand, rounded corners and spots.
For grinding, is a good idea to work out the amount of sawdust, so that you limit to everything, what will be installed, too.
When you're done sanding you need to patch.
Since this is a big project, it is a good idea to go ahead and mix up to severalBoxes of dye in a bucket bigger. This ensures a uniform color for all doors.
The application of a protective varnish on the doors after the stain is dry.
That's all there is to build the door itself. Find out how the closet doors can be built very involved. Until you have the time and appropriate tools, whether it be a worthwhile way to save a lot of money in the transformation of the kitchen.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น