If you want new kitchen cabinets, but on a limited budget, the Assembly, they hold on to. If you are practical and other home renovation work done, you will save a lot of money by supplying your own labor. Cases of purchase will come with an installation guide. Be sure to read and follow them carefully.
The first thing you need to do is to thoroughly review the cabinets when they are delivered. Check for damage, and also to ensure that allThe components are included. Now that you know that you provide all the material for the job, sure that the right tools for the job.
It is important to the proper fasteners and screws that are suitable for cabinets to be used. Use new screws and ensure that they are the right size for cabinets.
Here is a list of the tools you need to carry out a kitchen cabinet installation:
o Carpenter Square
o Carpenter Level
o Tapemeasure
o Hammer
o Straight edge
o Drill
o Drill bits
o Chalk line
o Screw driver (power driver is best)
o Masking tape
o Utility knife
o Jigsaw
o Miter saw
o Step ladder
o Furniture clamps
o Shims
o Circuit tester
o Bit sander
Safety should be your first concern when you are installing cabinets. Have someone help you lift them since they are heavy. Wear proper Clothing, including work boots and safety glasses. Keep your work area of debris and dirt that falls to be avoided.
Turn off all the electricity if you do the job. Turn the unit in the kitchen and check the circuit with a circuit tester to make sure there is no electricity. Disconnect and move appliances. Usually have a stove is an individual breaker, so make sure it is not connected. Make sure that the water supply to the sink before you die. OpenFittings for all the water run and pull the water and waste disposal lines.
If you stay with the existing plan, it is much easier to install the cabinets. If you have decided to change the layout to be the utilities must be moved, and you should hire a person for this. The moving of electric, gas and water is not for amateurs and if you make a mistake at the end to pay much more than might have been if you just hired the pros.
The firstStep now is to remove the old cabinets. When you lie down on a new floor, you do not have to be careful with the old one. If not, tape heavy cardboard to protect themselves over the existing floor to. Since the cabinets are removed, now is the time to repair any wall damage.
If you are ready to do the installation, read the instructions again and make sure you know how to proceed. If you have any questions, please call customer service to get answered before youStart of the project.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น